C.A. Technologies H2O Bobcat Air Assist Airless (AAA) Spray Gun Special Offers

Specifications:

• Includes 100 mesh inline filter
• 1800 psi maximum working pressure
• Air Inlet – ¼” NPS (m)
• Fluid Inlet – ¼”NPS (m)
• Weight – 17.1 oz.
• Requires 6 CFM
• The standard tip is .011 X 40° angle, other tip sizes are available (available sizes from .007 to .013 with angles from 20° to 70°)

Features & Benefits:

• Fine finish opti-tip that has a pre-orifice to help reduce the sheering of materials.
• 100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings
• This is an excellent atomizing spray gun that will provide a “class A” finish quality
• Fast production speeds with +65% transfer efficiency making it a very efficient spray gun
• The Bobcat provides better than 30% fan pattern width adjustment giving you added versatility on any project
• The Bobcat is also very light weight providing you a great feel and balance in your hand
• When the spray gun inlet air pressure is under 24 psi the air pressure coming out of the HVLP air cap on the front of the spray gun is less than 10 psi.

Information:

Please note that general tip recommendations can be found in the chart below.  For safety reasons, only pair this spray gun with AAA Pumps that generate a maximum 1800 psi working pressure or less.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet.