C.A. Technologies Automatic Bobcat Air Assist Airless (AAA) Spray Gun Premium

Specifications:

• Can be configured for re-circulating or dead head.
• 2500 psi maximum working pressure
• Air Atomization Inlet – 1/4″ NPT (f)
• Fluid Inlet – 1/4″ NPS (m)
• Trigger Cylinder Inlet – 1/8″ NPT (f)
• Weight – 20 oz.
• Requires 6 CFM
• Manual fan width adjustment
• The standard tip is .011 X 40° angle, other tip sizes are available (available sizes from .007 to .021 with angles from 20° to 80°)
• Optional Cefla® air manifold block upon request.

Additional Features & Benefits:

• 100% stainless steel fluid passages, nozzle and needle makes this spray gun perfect for water based coatings
• This is an excellent atomizing spray gun that will provide a “class A” finish quality
• Fast production speeds with +65% transfer efficiency making it a very efficient spray gun
• The Bobcat provides better than 30% fan pattern width adjustment giving you added versatility on any project
• When the spray gun inlet air pressure is under 24 psi the air pressure coming out of the HVLP air cap on the front of the spray gun is less than 10 psi.

Information:

Please note that general tip recommendations can be found in the chart below.  For safety reasons, only pair this spray gun with AAA Pumps that generate a maximum 2500 psi working pressure or less.  For more detailed information on the spray gun such as parts, setup & maintenance, please review the part sheet.  Repair kit is part # 10-145 and soft seal repair kit  is part # 10-144.

Solvent & Water Base Coating Applications – Chart

The tips best suited for water-based coatings are the opti-tip series (ex. 36-XXX-F) with the “F” connotation after the tip part #.  They incorporate a pre-orifice to double shear the water-base coating which assists in a finer atomization.