3M PPS Series 2.0 Spray Cup System Kit – Micro 90 ml (3 oz.) Disposable Liners & Lids (200 Micron Filter) – Case of 50 (26028) Top Sellers

Specifications:

• 90 ml (3 oz.) size – micro
• 200 micron full diameter lid filter (pre-welded filter)
• For use with the standard 200 ml (6.8 oz.) gravity cup (26115) as well as the midi 400 ml (13.5 oz.) H/O pressure feed cup (26121)
• Part Number 26028, 3M Stock # 7100134640 (Previous 3M Stock # 60455003586), UPC # 00051131260283

Package (Kit) includes:

• 50 Liners
• 50 Lids with (200 micron pre-welded filter) – each lid includes a quarter-turn lid locking system (collar)
• 32 sealing plugs
• 1 reusable hard cup (26115) – gravity, non-pressure

*H/O pressure feed reusable hard cup (26121) for use with pressure feed spray guns sold separately.  When using the H/O pressure feed cup remove the black integrated collar on each lid to ensure the lid fits under the H/O cup cover.

Additional Details:

• 3M™ PPS™ Series 2.0 is our next generation, highest performing disposable spray cup system
• New quarter-turn lid locking system locks lid to cup and eliminates paint build up and cross threading
• Redesigned adapters provide four points of connection from spray gun to lid, improving stability and confidence especially in large applications
• Domed lid geometry and a wider fluid spout allows up to 3 fl. oz. (90 mL) of material to be held below the filter reducing inconsistent spray due to air-entrapment and sputter
• Full-diameter filters are built into every lid for the highest quality filtration; aids with fluid flow
• A new reusable hard cup is included in every lid/liner kit
• Mixing ratios are printed on each cup and a clear access window allows users to grasp liner while removing the lid, making tinting/refilling easier
• Enlarged sealing plugs provide stable base for cups to be placed upside down, keeping filters wet during temporary sealing and protection of coatings not in use
• 3M™ PPS™ (Legacy) red dispensers can be used with 3M™ PPS™ Series 2.0
• 3M™ PPS™ reduces cleaning solvent consumption by up to 70% and reduces prep and clean-up time by up to 50%; compared to conventional paint cup systems

The Heart of 3M™ PPS™ Series 2.0
3M™ PPS™ Series 2.0 Kit features the next generation of the 3M™ PPS™ paint preparation system. It contains all of the reusable, disposable components of the system: 50 disposable lids with integrated collars and full diameter filters, 50 disposable liners, 1 reusable hard cup and 32 sealing plugs. The 3M™ PPS™ system features disposable lids, liners and hard plastic cups in 5 sizes: 3oz (90mL), 6.8oz (200mL), 13.5oz (400mL), 22oz (650mL) and 28oz (850mL). A choice of sizes offers maximum efficiency for every job and helps lower your cost per use. 

Next Generation of the 3M™ PPS™ Paint Preparation System
The 3M™ PPS™ Series 2.0 Spray Cup System is our latest, best-performing disposable spray cup system. The system has been redesigned from the connection to the cup and has been improved in six ways offering a complete disposable spray cup solution for mixing/measuring, filtering, spraying and for temporary sealing and protection of sprayable coatings.

Cleanest Disposable Cup System
Every PPS™ Series 2.0 lid features a quarter-turn lid locking system to help reduce paint build-up and possible contamination. Additionally, each lid and liner kit contain a new hard cup which also features universal mixing ratios built into the cup, eliminating the need for separate inserts and helping ensure the most accurate mix possible.

Reduce Material Waste by Mixing in the Cup
3M™ PPS™ Series 2.0 makes it even easier to mix directly in the cup. If you’re mixing on a scale, use the “max fill” notation on each cup to fit the maximum amount. Cups include a clear access window to help you see how much material is left while spraying. The window also allows you to hold the liner for easier, cleaner lid removal. This is especially useful during refills or tinting.

Improved Fluid Flow for More Consistent Paint Application
Our 3M™ PPS™ Series 2.0 Lids feature a domed geometry that allows up to 3 oz (90mL) of material below the filter during on-demand spraying. This reduces sputter and other inconsistencies in spray performance. Lids also feature a wider spout for improved fluid flow. A built-in full-diameter filter delivers the highest quality filtration – no assembly needed.

More Confidence in the Connection to Your Gun
A new adapter design provides a four-point connection and a wider 360° platform to ensure a stable, reliable lid-to-spray-gun connection. Larger sealing plugs do more than just seal. For instance, you can turn the cup upside down and use the new sealing plug as a base for temporary sealing and protecting, helping keep the built-in filter wet and reducing the need for replacement lids.

A System for Both Solvent-Based and Waterborne Products
Every lid features a built-in full diameter filter available in 200 micron or 125 micron mesh. Be sure to consult the paint or coatings manufacturer for the recommended filter mesh size.

Use the Right Size Cup for Every Repair
Our PPS™ 2.0 Spray Cup System is available in 5 sizes: 3 oz (90mL), 6.8 oz (200mL), 13.5 oz (400mL), 22 oz (650mL) and 28 oz (850mL). Using the right size cup for every repair not only reduces your cost per lid and liner, it can reduce the likelihood of overmixing.

Reduce Solvent Usage by up to 70%
After spraying, the painter can use the sealing plug to seal and protect the paint or coating for later use or simply discard the lid and liner, leaving only the adapter and spray gun to clean. Discard the disposable lid and liner in accordance with local government requirements. Use a small amount of solvent for cleaning the spray gun and the PPS™ Adapter. Shops using PPS™ Series 2.0 often experience a 70% reduction in cleaning solvent usage. Most guns can be cleaned with less than 3 oz. of solvent.

Your Spray Gun Functions at any Angle, Even Upside Down
Because PPS™ Series 2.0 is a closed system, you can spray in any orientation to a full 360 degrees. This allows the painter to spray consistently at 90° to the part, no matter how the part is positioned. It makes material transfer more consistent, limits paint overspray and reduces paint consumption.

Reduces the Chance of Contamination Between Jobs
Because the painter uses a new disposable lid and liner for each mix, there is less risk of outside contamination. Using a fresh lid and liner with each paint job, rather than washing out reusable components, often improves overall productivity in prep and clean-up time by as much as 50%. 

The Bottom Line: Why 3M™ PPS™ Series 2.0 is the Disposable Cup of Choice
3M™ invented disposable cups for paint application and will continue to re-invent based on our customer’s feedback. What customers have taught us, is that trust and confidence in their disposable paint cup system is king. The consistent performance of the 3M™ PPS™ System has earned the trust of experts in one of the most important parts of a repair or manufacturing process – paint application. PPS™ Series 2.0 is the culmination of more than 15 years of painter feedback and a true next generation all-in-one disposable painting system that produces cleaner jobs, saves on paint consumption and reduces solvent usage by up to 70%.

Information:

*(Please note that the 3M™ PPS™ Series 2.0 Lid & Liner Kits contain 50 disposable lids (Micro size) or 50 disposable lids (all other sizes) with welded-in filters to strain paint material while spraying, along with corresponding liners and sealing plugs for use with the 3M™ PPS™ Series 2.0 paint preparation system only. Kits are available in five sizes for a range of jobs large and small.  IMPORTANT: The 125 micron filtration liners & lids are only for automotive water-base base coats, not for industrial water-base coatings. All other projects would require the 200 micron filter for proper coating flow.)