3M™ Performance 2.0 MM (Red) Pressure HVLP Atomizing Head Refill Kit – 10 Pack (26820) Attractive

Specifications:

• 2.0 mm atomizing head nozzle size (Red)
• Disposable pressure atomizing head nozzle type
• 10 atomizing heads per pack
• Fluid Inlet – ¼” NPS (BSP)
• Nozzle rotates for vertical and horizontal spraying
• Quick-change nozzles in sizes 0.9, 1.1, 1.4, 1.8 and 2.0 for spraying a wide range of industrial and automotive coatings
• Nozzles attach to the spray gun and whip hose easily without the need for additional tools
• Like-new spray performance with each new atomizing head
• Excellent pattern control, atomization and transfer efficiency
• Use exclusively with the 3M™ Performance Spray Gun
• Recommended air inlet pressure is 18 psi (1.24 Bar) for pressure feed
• Required atomizing air volume is 13 cfm
• Weight – 8.7 oz (per 10 pack)
• Part Number 26820, 3M Stock # 7100271256 (Previous 3M Stock # 60455114748), UPC 00051131268203

Nozzle Recommendation Chart – Pressure

(Starting points only, refer to Paint Manufacture for recommendation on fluid tip size.)

Information:

Please note that the 0.9 mm (26809), 1.1 mm (26811), 1.4 mm (26814) and the 1.8 mm atomizing heads (26818) are sold separately in 10 packs as well.  The spray gun and nozzles should not be immersed in cleaning solvents or gun washers.  The maximum recommended operational air inlet pressure of this HVLP spray gun is 18 psi.  For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual.