3M™ Performance 1.8 MM (Clear) Gravity HVLP Atomizing Head Refill Kit – 5 Pack (26718) Special

Specifications:

• 1.8 mm atomizing head nozzle size (Clear)
• Disposable pressure atomizing head nozzle type
• 5 atomizing heads per pack
• Nozzle rotates for vertical and horizontal spraying
• Quick-change nozzles range from 1.2 to 2.0 for spraying a wide range of industrial and automotive coatings
• Like-new spray performance with each new atomizing head
• Use exclusively with the 3M™ Performance Spray Gun and 3M™ PPS™ Series 2.0 Spray Cup System
• Exceptional pattern control, atomization and transfer efficiency
• Nozzle sizes include: 1.2, 1.3, 1.4, 1.6, 1.8, and 2.0
• Recommended air inlet pressure is 20 psi (1.38 Bar) for gravity feed
• Required atomizing air volume is 13 cfm
• Weight – 5.7 oz (per 5 pack)
• Part Number 26718, 3M Stock # 7100206003 (Previous 3M Stock # 60455108682), UPC 00051131267183

Nozzle Recommendation Chart – Gravity

(Starting points only, refer to Paint Manufacture for recommendation on fluid tip size.)

Information:

*(Please note that the various gravity feed atomizing head sizes are sold separately in 5 packs.  The spray gun and nozzles should not be immersed in cleaning solvents or gun washers.  The maximum recommended operational air inlet pressure of this HVLP spray gun for gravity feed is 20 psi.  For more detailed information on the spray gun such as parts, setup & maintenance, please see the technical data sheet and spray gun manual).